Overview of materials for Thermoset Polyurethane, Elastomer, Glass Filled
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
This property data is a summary of similar materials in the MatWeb database for the category “Thermoset Polyurethane, Elastomer, Glass Filled”. Each property range of values reported is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points used to calculate the average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected by additives or processing methods.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.950 – 1.25 g/cc | 0.0343 – 0.0452 lb/in³ | Average value: 1.16 g/cc Grade Count:11 |
| Water Absorption at Saturation | 0.100 – 2.80 % | 0.100 – 2.80 % | Average value: 1.16 % Grade Count:5 |
| Linear Mold Shrinkage | 0.00430 – 0.00750 cm/cm | 0.00430 – 0.00750 in/in | Average value: 0.00607 cm/cm Grade Count:11 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 16.0 – 38.0 MPa | 2320 – 5510 psi | Average value: 27.4 MPa Grade Count:11 |
| Elongation at Break | 15.0 – 200 % | 15.0 – 200 % | Average value: 86.5 % Grade Count:11 |
| Flexural Modulus | 0.470 – 2.07 GPa | 68.2 – 300 ksi | Average value: 1.20 GPa Grade Count:11 |
| Izod Impact, Notched | 0.500 – 4.30 J/cm | 0.937 – 8.06 ft-lb/in | Average value: 1.82 J/cm Grade Count:9 |
| Tear Strength | 70.0 – 140 kN/m | 399 – 799 pli | Average value: 107 kN/m Grade Count:11 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 49.0 – 137 µm/m-°C | 27.2 – 76.1 µin/in-°F | Average value: 75.3 µm/m-°C Grade Count:10 |
