Permabond HM128 Anaerobic Threadlocker
| Manufacturer | Permabond |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Permabond® HM128 Threadlocker is a high strength adhesive for permanent assembly. It is typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked plastic is achieved reliably and fast on steel and all common bolt platings. Additional application areas include machinery, equipment, and electric motor manufacturers. PERMABOND® HM128 Threadlocker replaces lock washers. Features & Benefits: Prevents vibration loosening Controlled off-torque Permanent threadlocking Full cure at room temperature Lubricates threads for easier assembly Provides corrosion protection Superior environmental resistance Environmentally friendly – 100% solids Information provided by Permabond.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.10 g/cc | 1.10 g/cc | Uncured |
| Viscosity | 500 cP
@Temperature 25.0 °C
|
500 cP
@Temperature 77.0 °F
|
Uncured |
| Storage Temperature | 5.00 – 25.0 °C | 41.0 – 77.0 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Adhesive Bond Strength | 17.0 MPa | 2470 psi | steel collar and pin shear; ISO 10123 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 90.0 µm/m-°C | 50.0 µin/in-°F | |
| Thermal Conductivity | 0.190 W/m-K | 1.32 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 149 °C | 300 °F | |
| Minimum Service Temperature, Air | -53.9 °C | -65.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 11.0 kV/mm | 279 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 4.98 min
@Temperature 23.0 °C
|
0.0830 hour
@Temperature 73.4 °F
|
Brass, handling strength |
| 15.0 min
@Temperature 23.0 °C
|
0.250 hour
@Temperature 73.4 °F
|
M10 steel, handling strength | |
| 30.0 min
@Temperature 23.0 °C
|
0.500 hour
@Temperature 73.4 °F
|
Brass, working strength | |
| 60.0 min
@Temperature 23.0 °C
|
1.00 hour
@Temperature 73.4 °F
|
Zinc, handling strength | |
| 60.0 – 180 min
@Temperature 23.0 °C
|
1.00 – 3.00 hour
@Temperature 73.4 °F
|
M10 steel, working strength | |
| 360 min
@Temperature 23.0 °C
|
6.00 hour
@Temperature 73.4 °F
|
Stainless steel, handling strength | |
| 1440 min
@Temperature 23.0 °C
|
24.0 hour
@Temperature 73.4 °F
|
M10 steel, full strength | |
| 4320 min
@Temperature 23.0 °C
|
72.0 hour
@Temperature 73.4 °F
|
Zinc, working strength |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Red | Uncured |
| Maximum Gap Fill (mm) | 0.15 | |
| Maximum Thread Size | M20 | |
| Strength Retention | 50% at 150°C | Relative to 0°C |
| 80% at 100°C | Relative to 0°C | |
| 93% at 50°C | Relative to 0°C | |
| Torque Strength (N m) | 31 | M10 steel, break |
| 40 | M10 steel, prevail | |
| UV Fluorescence | Yes | Uncured |
