Samsung Cheil Industries Starex® HF-5330S ASA, Unreinforced (discontinued **)
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Amorphous Styrene Acrylonitrile (SAN)Characteristics: Heat Resistant: Impact and Chemical Resistance, Surface GlossApplications: Oil Filter Case, Lubricant Can, Refrigerator and Hair Dryer ComponentsProcessing: Injection Molding (Melt Temperature: 460-500°F, Mold Temperature: 100-175°F)Starex® is a registered trademark of Cheil Industries, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.08 g/cc | 0.0390 lb/in³ | ASTM D792 |
| Water Absorption | 0.30 % | 0.30 % | (24 hr); ASTM D570 |
| Linear Mold Shrinkage | 0.0020 – 0.0040 cm/cm | 0.0020 – 0.0040 in/in | ASTM D955 |
| Melt Flow | 1.9 g/10 min
@Load 5.00 kg,
Temperature 200 °C |
1.9 g/10 min
@Load 11.0 lb,
Temperature 392 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 76 | 76 | ASTM D785 |
| Tensile Strength, Ultimate | 75.5 MPa | 11000 psi | ASTM D638 |
| Elongation at Break | 5.7 % | 5.7 % | ASTM D638 |
| Flexural Yield Strength | 112.8 MPa | 16360 psi | ASTM D790 |
| Flexural Modulus | 3.16 GPa | 458 ksi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 93.0 °C | 199 °F | ASTM D648 |
| Vicat Softening Point | 107 °C | 225 °F | ASTM D1525 |
| Flammability, UL94 | HB | HB | 0.125 in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 238 – 260 °C | 460 – 500 °F | Injection |
| Mold Temperature | 38.0 – 79.0 °C | 100 – 174 °F |
