Plenco 1501 Polyester, Pellet, Injection Molded
| Manufacturer | Plenco (Plastics Engineering Company) |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
PLENCO 01501 is a general purpose, mineral filled granular polyester molding compound, offering excellent arc and track resistance properties, low post shrinkage, and improved mechanical strength values. UL recognized under component file E40654. 01501 is available in gray, blue, or tan color.Information supplied by Plenco.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.820 g/cc | 0.0296 lb/in³ | ASTM D1895 |
| Density | 1.87 g/cc | 0.0676 lb/in³ | ASTM D792 |
| Water Absorption | 0.238 % | 0.238 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0091 cm/cm | 0.0091 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell E | 65 | 65 | ASTM D785 |
| Tensile Strength, Ultimate | 47.0 MPa | 6820 psi | ASTM D638 |
| Elongation at Break | 0.61 % | 0.61 % | ASTM D638 |
| Tensile Modulus | 10.3 GPa | 1490 ksi | ASTM D638 |
| Flexural Strength | 83.0 MPa | 12000 psi | ASTM D790 |
| Flexural Modulus | 9.70 GPa | 1410 ksi | ASTM D790 |
| Compressive Strength | 150 MPa | 21800 psi | ASTM D695 |
| Poissons Ratio | 0.33 | 0.33 | ASTM D638 |
| Shear Modulus | 3.87 GPa | 561 ksi | Calculated |
| Izod Impact, Notched | 0.198 J/cm | 0.371 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.218 J/cm² | 1.04 ft-lb/in² | ASTM D256 |
| Impact | 133 | 133 | J/m Drop Ball Impact; PLENCO |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 46.0 µm/m-°C
@Temperature 40.0 – 130 °C
|
25.6 µin/in-°F
@Temperature 104 – 266 °F
|
TMA; ASTM E831 |
| Maximum Service Temperature, Air | 170 °C | 338 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 182 °C | 360 °F | ASTM D648 |
| Flammability, UL94 | HB
@Thickness 1.50 mm
|
HB
@Thickness 0.0591 in
|
|
| Oxygen Index | 24 % | 24 % | ASTM D2863 |
| Shrinkage | 0.038 % | 0.038 % | 72 hr, 120ºC; ASTM D1299 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 6.60e+15 ohm-cm | 6.60e+15 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.9 | 4.9 | ASTM D150 |
| Dielectric Strength | 10.5 kV/mm | 267 kV/in | Step by Step; ASTM D149 |
| 12.4 kV/mm | 315 kV/in | Short Time; ASTM D149 | |
| Dielectric Breakdown | 15400 V | 15400 V | 1hr 120C; ASTM D149 |
| Dissipation Factor | 0.0266 | 0.0266 | ASTM D150 |
| Arc Resistance | 187 sec | 187 sec | ASTM D495 |
| Comparative Tracking Index | 600 V | 600 V | ASTM D3638 |
