Quadrant EPP Duratron® PAI T4203 PAI, unfilled, extruded (ISO Data)
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Duratron® PAI |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Duratron T4203 PAI offers the best toughness and impact strength of all Duratron PAI grades. This extruded Duratron PAI grade is very popular for precision parts in high-tech equipment. In addition, its good electrical insulating ability provides numerous possibilities in the field of electrical components. Very high maximum allowable service temperature in air (250°C continuously) Excellent retention of mechanical strength, stiffness and creep resistance over a wide temperature range Superb dimensional stability up to 260°C Excellent wear & frictional behaviour (particulary Duratron T4301 & T4501 PAI) Very good UV-resistance Exceptional resistance against high energy radiation (gamma- and X-rays) Inherent low flammability
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.41 g/cc | 0.0509 lb/in³ | ISO 1183-1 |
| Moisture Absorption at Equilibrium | 2.5 % | 2.5 % | 50% RH |
| Water Absorption at Saturation | 4.4 % | 4.4 % | |
| Outgassing – Total Mass Loss | 1.9 % | 1.9 % |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell E | 80 | 80 | ISO 2039-2 |
| Hardness, Shore D | 88 | 88 | |
| Ball Indentation Hardness | 200 MPa | 29000 psi | ISO 2039-1 |
| Tensile Strength | 150 MPa | 21800 psi | at Yield; ISO 527-1/-2 |
| Elongation at Break | 20 % | 20 % | ISO 527-1/-2 |
| Elongation at Yield | 9.0 % | 9.0 % | ISO 527-1/-2 |
| Tensile Modulus | 4.20 GPa | 609 ksi | ISO 527-1/-2 |
| Flexural Strength | 178 MPa | 25800 psi | |
| Compressive Strength | 34.0 MPa
@Strain 1 %
|
4930 psi
@Strain 1 %
|
ISO 604 |
| 67.0 MPa
@Strain 2 %
|
9720 psi
@Strain 2 %
|
ISO 604 | |
| 135 MPa
@Strain 5 %
|
19600 psi
@Strain 5 %
|
ISO 604 | |
| K Factor (ISO) | 5.0 µm/km | 5.0 µm/km | |
| Charpy Impact Unnotched | NB | NB | ISO 179-1/1eU |
| Charpy Impact, Notched | 1.50 J/cm² | 7.14 ft-lb/in² | ISO 179-1/1eA |
| Coefficient of Friction, Dynamic | 0.35 – 0.60 | 0.35 – 0.60 | |
| Limiting Pressure Velocity | 0.200 MPa-m/sec | 5710 psi-ft/min | at 1 m/s unlubricated |
| 0.320 MPa-m/sec | 9140 psi-ft/min | at 0.1 m/s unlubricated |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 40.0 µm/m-°C
@Temperature 23.0 – 100 °C
|
22.2 µin/in-°F
@Temperature 73.4 – 212 °F
|
|
| Thermal Conductivity | 0.260 W/m-K | 1.80 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 250 °C | 482 °F | Continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 280 °C | 536 °F | ISO 75-1/-2 |
| Glass Transition Temp, Tg | 280 °C | 536 °F | DSC, 20°C/min.; ISO 11357-1/-2 |
| Flammability, UL94 | V-0 | V-0 | |
| Oxygen Index | 45 % | 45 % | ISO 4589-1/-2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.0e+14 ohm-cm | >= 1.0e+14 ohm-cm | IEC 60093 |
| Surface Resistivity per Square | >= 1.0e+13 ohm | >= 1.0e+13 ohm | IEC 60093 |
| Dielectric Constant | 4.2
@Frequency >=100000 Hz
|
4.2
@Frequency >=100000 Hz
|
IEC 60250 |
| Dielectric Strength | 24.0 kV/mm | 610 kV/in | |
| Dissipation Factor | 0.026
@Frequency 100000 Hz
|
0.026
@Frequency 100000 Hz
|
IEC 60250 |
| Comparative Tracking Index | 175 V | 175 V | IEC 60112 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| European Food 1935/2004 | No | No | |
| FDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons – Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons – Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
