DSM Arnite® D00 301 PET (European Grade) (discontinued **)
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Arnite resins are engineered to provide specific performance in applications where DSM technology can offer value.Arnite Molding resins: Standard Unfilled and Reinforced materialsHigh modulus Flame retardant gradesEasy molding FR grades for connectorsToughened unfilled materials for durabilityHigh modulus, tight specification for critical auto componentsToughened reinforced resinsLow outgassing grades for reflector surfacesArnite extrusion resins: Specialized materials for specific usesPET for medical applicationsLoose buffer Optical fiber tubingPET for stock shapesApplicationsAutomotive:Connectors, sensors and E&E parts, Exterior fittings, Gear housings and motors, Brake valve bodiesElectrical & Electronic: Telecoms and IT connectors, Bobbins, Low voltage Power distribution, E-motor components, Lightings and Lamp fittingsConsumer Durables: Small AppliancesOther: Optical fiber tubingInformation provided by DSM.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.34 g/cc | 0.0484 lb/in³ | ISO 1183 |
| Water Absorption | 0.80 % | 0.80 % | Sim. to ISO 62 |
| Moisture Absorption at Equilibrium | 0.30 % | 0.30 % | Humidity Absorption; Sim. to ISO 62 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 60.0 MPa | 8700 psi | ISO 527-1/-2 |
| Elongation at Break | >= 50 % | >= 50 % | ISO 527-1/-2 |
| Elongation at Yield | 3.5 % | 3.5 % | ISO 527-1/-2 |
| Tensile Modulus | 2.50 GPa | 363 ksi | ISO 527-1/-2 |
| Charpy Impact Unnotched | NB
@Temperature 23.0 °C
|
NB
@Temperature 73.4 °F
|
ISO 179/1eU |
| Charpy Impact, Notched | 0.600 J/cm²
@Temperature 23.0 °C
|
2.86 ft-lb/in²
@Temperature 73.4 °F
|
ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 80.0 µm/m-°C
@Temperature 20.0 °C
|
44.4 µin/in-°F
@Temperature 68.0 °F
|
ISO 11359-1/-2 |
| CTE, linear, Transverse to Flow | 80.0 µm/m-°C
@Temperature 20.0 °C
|
44.4 µin/in-°F
@Temperature 68.0 °F
|
ISO 11359-1/-2 |
| Melting Point | 255 °C | 491 °F | 10°C/min; ISO 11357-1/-3 |
| Deflection Temperature at 0.46 MPa (66 psi) | 75.0 °C | 167 °F | ISO 75-1/-2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75-1/-2 |
| Flammability, UL94 | HB
@Thickness 1.60 mm
|
HB
@Thickness 0.0630 in
|
IEC 60695-11-10 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | IEC 60093 |
| Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm | IEC 60093 |
| Dielectric Constant | 3.4
@Frequency 1e+6 Hz
|
3.4
@Frequency 1e+6 Hz
|
IEC 60250 |
| 3.7
@Frequency 100 Hz
|
3.7
@Frequency 100 Hz
|
IEC 60250 | |
| Dielectric Strength | 23.0 kV/mm | 584 kV/in | IEC 60243-1 |
| Dissipation Factor | 0.0030
@Frequency 100 Hz
|
0.0030
@Frequency 100 Hz
|
IEC 60250 |
| 0.025
@Frequency 1e+6 Hz
|
0.025
@Frequency 1e+6 Hz
|
IEC 60250 | |
| Comparative Tracking Index | 200 V | 200 V | IEC 60112 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Injection molding | Yes | |
| Other Extrusion | Yes | |
| Transparent | Yes | |
| Without Fillers | Yes |
