Eastman Neostar FN006 Elastomer
| Manufacturer | Eastman Chemical |
| Trade Name | Neostar |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Neostar FN006 elastomer is the second in Eastman’s series of tough, clear, durable copolyester ethers. Developed for use in the profile and automotive markets, it can also be used in packaging and tubing applications. Its chemical resistance, flexibility, and toughness make it an ideal choice for applications where strength, durability, and puncture resistance in harsh environments is required. Neostar FN006 can be used in injection molding or cast film, blown film, or tubing extrusion applications. This copolyester has a full range of flexibility and memory without the addition of plasticizers. Considered environmentally preferred due to its non-halogenated material composition, it can be incinerated cleanly without the emission of toxic gases. The target inherent viscosity of this product is 1.6.Applications/UsesAutomotiveFlexible hingesPricing channelsRetail pricing finsDriver and passenger side air bagsPackagingProfilesTubingKey AttributesEnvironmentally preferred, non-halogenated materialExcellent chemical resistanceExceptional heat resistance and high temperature dimensional stabilityHigh flexibility without plasticizersSolvent bondable
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.13 g/cc | 1.13 g/cc | ASTM D792 |
| Water Absorption | 0.40 % | 0.40 % | 24h Immersion; ASTM D570 |
| Viscosity Measurement | 1.16 | 1.16 | Inherent; EMN-A-AC-G-V-1 |
| Melt Flow | 10 g/10 min
@Load 2.16 kg,
Temperature 230 °C |
10 g/10 min
@Load 4.76 lb,
Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 95 | 95 | ASTM D2240 |
| Hardness, Shore D | 55 | 55 | ASTM D2240 |
| Tensile Strength at Break | 22.0 MPa | 3190 psi | ASTM D638 |
| Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
| Elongation at Break | 400 % | 400 % | ASTM D638 |
| Elongation at Yield | 38 % | 38 % | ASTM D638 |
| Tensile Modulus | 0.170 GPa | 24.7 ksi | ASTM D638 |
| Flexural Modulus | 0.150 GPa | 21.8 ksi | ASTM D790 |
| Izod Impact, Notched | 0.400 J/cm
@Temperature -40.0 °C
|
0.749 ft-lb/in
@Temperature -40.0 °F
|
ASTM D256 |
| Tear Strength, Total | 350 N | 78.7 lb (f) | ASTM D1004 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Heat of Fusion | 27.0 J/g | 11.6 BTU/lb | ASTM E793 |
| CTE, linear | 150 µm/m-°C
@Temperature 20.0 °C
|
83.3 µin/in-°F
@Temperature 68.0 °F
|
ASTM D696 |
| Specific Heat Capacity | 1.60 J/g-°C | 0.382 BTU/lb-°F | DSC |
| 1.80 J/g-°C
@Temperature 100 °C
|
0.430 BTU/lb-°F
@Temperature 212 °F
|
DSC | |
| 2.00 J/g-°C
@Temperature 150 °C
|
0.478 BTU/lb-°F
@Temperature 302 °F
|
DSC | |
| 2.30 J/g-°C
@Temperature 175 °C
|
0.550 BTU/lb-°F
@Temperature 347 °F
|
solid; DSC | |
| 2.30 J/g-°C
@Temperature 225 °C
|
0.550 BTU/lb-°F
@Temperature 437 °F
|
melt; DSC | |
| 3.10 J/g-°C
@Temperature 200 °C
|
0.741 BTU/lb-°F
@Temperature 392 °F
|
transition; DSC | |
| Thermal Conductivity | 0.190 W/m-K | 1.32 BTU-in/hr-ft²-°F | ASTM C177 |
| Melting Point | 205 °C | 401 °F | Crystalline Peak Melting Point; ASTM D3418 |
| Crystallization Temperature | 140 °C | 284 °F | on cooling; DSC |
| Vicat Softening Point | 170 °C | 338 °F | 1kg load; ASTM D1525 |
| Brittleness Temperature | <= -75.0 °C | <= -103 °F | ASTM D746 |
| Glass Transition Temp, Tg | -3.00 °C | 26.6 °F | DSC |
| Clash Berg Stiffness Temperature | <= -70.0 °C | <= -94.0 °F | at 930 MPa; ASTM D1043 |
| -28.0 °C | -18.4 °F | at 240 MPa; ASTM D1043 |
