PolyOne Geon™ Specialty Suspension Atlas S140 Polyvinyl Chloride Homopolymer (PVC Homopolymer)
| Manufacturer | PolyOne Corporation |
| Trade Name | Geon™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Geon® Atlas S140 is high molecular weight homopolymer specialty suspension resin intended for use in high strength extruded parts. It improves the physical performance of end application for intsance wire and cable insulation, extruded tubes. The high porosity property of this resin allows rapid plasticizer absorption reducing the compound cycle times and resulting in high compound throughput and low manufacturing cost. Geon® Atlas S140 improves heat distortion (HDT) performance, increase the strength for highly plasticized formulas, and provides longer product shelf life.Note: The value set forth represent ‘typical’ values and PolyOne Corporation, therefore, makes no representation that the material in any particular shipment will conform to the listed properties. Packaging: This resin is shipped in multi-wall paper bags, netweight 50lbs, 2,500lbs per pallet. Information shown on the package includes commercial identification number, lot, and weight. STP 488 (formulation): 100phr Geon® Atlas S140, 55phr TOTM, and 18phr Filler ASTM D638 (formulation): 100phr Geon® Atlas S140, 60phr DINP, 5phr ESO, and 2phr Mark 4716Information provided by PolyOne
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
| Volatiles | 0.070 % | 0.070 % | Geon® STP 793; Internal Method |
| Apparent Bulk Density | 0.410 g/cc | 0.0148 lb/in³ | Geon® STP 1169; Internal Method |
| Porosity | 0.57 % | 0.57 % | cm³/g; Geon® STP 1094; Internal Method |
| Particle Size | <= 105 µm | <= 105 µm | 14.8%; Geon® DFT 1466; Internal Method |
| 145 µm | 145 µm | Average Particle SizeGeon® DFT 1466; Internal Method | |
| >= 250 µm | >= 250 µm | 3.4%; Geon® DFT 1466; Internal Method | |
| Relative Viscosity | 3.1 cP | 3.1 cP | Correlation, Cyclohexanone 1%; Internal Method |
| Viscosity Measurement | 1.4 | 1.4 | Inherent; ASTM D1243-60-A |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 17.9 MPa | 2600 psi | Optimum; With provided formulation; ASTM D638 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Contamination | 0 | Internal Method; Magnetic ParticlesGeon® STP 1217 Unit: #/100in2 |
| 1 | Internal Method; Dark ParticlesGeon® STP 1217 Unit: #/100in2 | |
| 4 | Internal Method; Light Colored ParticlesGeon® STP 1217 Unit: #/100in2 | |
| Features | High Strength | |
| Flow Time | 27 sec | Internal Method; Conditioned Funnel Flow TimeGeon® STP 1169 |
| Forms | Powder | White powder |
| Generic Material | PVC Homopolymer | |
| Generic Name | Polyvinyl Chloride Homopolymer (PVC Homopolymer) | |
| K-Value | 82 | Internal Method; Correlation, 0.5g/100ml |
| Polymerization Process | Suspension | |
| Powder Mix Time | 2.6 min | Internal Method; Geon® STP 488 with provided formulation |
| Processing Method | Extrusion | |
| Regional Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| North America | ||
| South America | ||
| Residual Vinyl Chloride Monomer | < 1 ppm | Internal Method; Geon® STP 1005 |
| Uses | Insulation | |
| Wire & Cable Applications |
