Overview of materials for Polyethersulfone (PES), 20% Glass Fiber Filled
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
This property data is a summary of similar materials in the MatWeb database for the category “Polyethersulfone (PES), 20% Glass Fiber Filled”. Each property range of values reported is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points used to calculate the average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected by additives or processing methods.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.47 – 1.62 g/cc | 0.0531 – 0.0585 lb/in³ | Average value: 1.51 g/cc Grade Count:27 |
| Filler Content | 15.0 – 20.0 % | 15.0 – 20.0 % | Average value: 18.5 % Grade Count:17 |
| Water Absorption | 0.180 – 1.60 % | 0.180 – 1.60 % | Average value: 0.516 % Grade Count:20 |
| Moisture Absorption at Equilibrium | 0.300 – 0.600 % | 0.300 – 0.600 % | Average value: 0.500 % Grade Count:3 |
| Linear Mold Shrinkage | 0.00100 – 0.00800 cm/cm | 0.00100 – 0.00800 in/in | Average value: 0.00335 cm/cm Grade Count:27 |
| Linear Mold Shrinkage, Transverse | 0.00250 – 0.00900 cm/cm | 0.00250 – 0.00900 in/in | Average value: 0.00599 cm/cm Grade Count:4 |
| Melt Flow | 6.00 – 43.5 g/10 min | 6.00 – 43.5 g/10 min | Average value: 26.2 g/10 min Grade Count:3 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 98.0 – 125 | 98.0 – 125 | Average value: 118 Grade Count:13 |
| Tensile Strength, Ultimate | 81.4 – 150 MPa | 11800 – 21800 psi | Average value: 118 MPa Grade Count:23 |
| 80.0 – 110 MPa
@Temperature 60.0 – 150 °C
|
11600 – 16000 psi
@Temperature 140 – 302 °F
|
Average value: 95.0 MPa Grade Count:1 | |
| Tensile Strength, Yield | 109 – 133 MPa | 15800 – 19300 psi | Average value: 125 MPa Grade Count:5 |
| Elongation at Break | 1.50 – 5.00 % | 1.50 – 5.00 % | Average value: 2.97 % Grade Count:27 |
| 2.60 – 3.00 %
@Temperature 60.0 – 150 °C
|
2.60 – 3.00 %
@Temperature 140 – 302 °F
|
Average value: 2.78 % Grade Count:1 | |
| Elongation at Yield | 2.50 – 2.50 %
@Temperature 150 – 150 °C
|
2.50 – 2.50 %
@Temperature 302 – 302 °F
|
Average value: 2.50 % Grade Count:1 |
| Modulus of Elasticity | 4.48 – 13.8 GPa | 650 – 2000 ksi | Average value: 6.61 GPa Grade Count:24 |
| 5.90 – 6.50 GPa
@Temperature 60.0 – 150 °C
|
856 – 943 ksi
@Temperature 140 – 302 °F
|
Average value: 6.21 GPa Grade Count:1 | |
| Flexural Yield Strength | 138 – 193 MPa | 20000 – 28000 psi | Average value: 175 MPa Grade Count:22 |
| Flexural Modulus | 3.79 – 6.89 GPa | 550 – 1000 ksi | Average value: 5.79 GPa Grade Count:22 |
| Compressive Yield Strength | 124 – 138 MPa | 18000 – 20000 psi | Average value: 131 MPa Grade Count:8 |
| Shear Modulus | 0.200 – 1.00 GPa
@Temperature 50.0 – 225 °C
|
29.0 – 145 ksi
@Temperature 122 – 437 °F
|
Average value: 0.762 GPa Grade Count:1 |
| Izod Impact, Notched | 0.320 – 0.854 J/cm | 0.600 – 1.60 ft-lb/in | Average value: 0.672 J/cm Grade Count:22 |
| Izod Impact, Unnotched | 1.87 – 7.47 J/cm | 3.50 – 14.0 ft-lb/in | Average value: 5.99 J/cm Grade Count:16 |
| Izod Impact, Notched (ISO) | 6.00 – 6.50 kJ/m² | 2.86 – 3.09 ft-lb/in² | Average value: 6.33 kJ/m² Grade Count:3 |
| 6.50 – 6.50 kJ/m²
@Temperature -30.0 – -30.0 °C
|
3.09 – 3.09 ft-lb/in²
@Temperature -22.0 – -22.0 °F
|
Average value: 6.50 kJ/m² Grade Count:1 | |
| Charpy Impact Unnotched | 2.50 – 4.70 J/cm² | 11.9 – 22.4 ft-lb/in² | Average value: 3.85 J/cm² Grade Count:4 |
| 4.50 – 4.50 J/cm²
@Temperature -30.0 – -30.0 °C
|
21.4 – 21.4 ft-lb/in²
@Temperature -22.0 – -22.0 °F
|
Average value: 4.50 J/cm² Grade Count:1 | |
| Charpy Impact, Notched | 0.400 – 0.650 J/cm² | 1.90 – 3.09 ft-lb/in² | Average value: 0.575 J/cm² Grade Count:4 |
| 0.650 – 0.650 J/cm²
@Temperature -30.0 – -30.0 °C
|
3.09 – 3.09 ft-lb/in²
@Temperature -22.0 – -22.0 °F
|
Average value: 0.650 J/cm² Grade Count:1 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 20.0 – 39.6 µm/m-°C | 11.1 – 22.0 µin/in-°F | Average value: 32.0 µm/m-°C Grade Count:15 |
| 23.0 – 23.0 µm/m-°C
@Temperature 140 – 180 °C
|
12.8 – 12.8 µin/in-°F
@Temperature 284 – 356 °F
|
Average value: 23.0 µm/m-°C Grade Count:2 | |
| Thermal Conductivity | 0.190 – 0.303 W/m-K | 1.32 – 2.10 BTU-in/hr-ft²-°F | Average value: 0.281 W/m-K Grade Count:8 |
| Maximum Service Temperature, Air | 180 – 220 °C | 356 – 428 °F | Average value: 199 °C Grade Count:4 |
| Deflection Temperature at 0.46 MPa (66 psi) | 210 – 224 °C | 410 – 435 °F | Average value: 217 °C Grade Count:10 |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 – 220 °C | 399 – 428 °F | Average value: 211 °C Grade Count:26 |
| Glass Transition Temp, Tg | 225 °C | 437 °F | Average value: 225 °C Grade Count:3 |
| Flammability, UL94 | V-0 | V-0 | Grade Count:23 |
| Oxygen Index | 39.0 – 44.5 % | 39.0 – 44.5 % | Average value: 41.6 % Grade Count:4 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 200 – 1.00e+17 ohm-cm | 200 – 1.00e+17 ohm-cm | Average value: 1.01e+16 ohm-cm Grade Count:22 |
| Surface Resistance | 200 – 1.00e+14 ohm | 200 – 1.00e+14 ohm | Average value: 7.50e+13 ohm Grade Count:4 |
| Dielectric Constant | 3.80 – 4.20 | 3.80 – 4.20 | Average value: 3.90 Grade Count:10 |
| Dielectric Strength | 14.8 – 37.0 kV/mm | 375 – 940 kV/in | Average value: 18.0 kV/mm Grade Count:15 |
| Dissipation Factor | 0.00150 – 0.0100 | 0.00150 – 0.0100 | Average value: 0.00611 Grade Count:10 |
| Arc Resistance | 70.0 – 110 sec | 70.0 – 110 sec | Average value: 75.6 sec Grade Count:9 |
| Comparative Tracking Index | 125 – 150 V | 125 – 150 V | Average value: 142 V Grade Count:3 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 80.0 – 366 °C | 176 – 690 °F | Average value: 320 °C Grade Count:8 |
| Melt Temperature | 340 – 399 °C | 644 – 750 °F | Average value: 363 °C Grade Count:16 |
| Mold Temperature | 93.0 – 190 °C | 199 – 374 °F | Average value: 155 °C Grade Count:23 |
| Drying Temperature | 135 – 180 °C | 275 – 356 °F | Average value: 151 °C Grade Count:15 |
| Moisture Content | 0.0400 % | 0.0400 % | Average value: 0.0400 % Grade Count:9 |
| Dew Point | -31.7 °C | -25.0 °F | Average value: -31.7 °C Grade Count:9 |
| Injection Pressure | 68.9 – 103 MPa | 10000 – 15000 psi | Average value: 86.2 MPa Grade Count:16 |
