Resinlab® CYNERGY CA6205 Adhesive
| Manufacturer | Resinlab® |
| Trade Name | CYNERGY |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Description: The CYNERGY 6200 SERIES products are for use in demanding applications where very fast cure speeds are required. Also used when difficult to bond and acidic surfaces are used such as EPDM, plasticized materials such as PVC and wood.Application: The CYNERGY SERIES of the cyanoacrylates should be applied in small amounts to one surface only. The parts should then be mated together under slight pressure. This causes the adhesive to spread out into a thin film and assures optimum adhesive performance. The pressure need only be applied for several seconds. The CYNERGY SERIES cures rapidly allowing for bonded parts to be handled within 10 to 60 seconds for most applications. Full cure is normally within 24 hours.Information Provided by Resinlab L.L.C., an Ellsworth Adhesives Company.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.05 g/cc | 1.05 g/cc | |
| Viscosity | 1000 cP | 1000 cP |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 19.3 MPa | 2800 psi | |
| Adhesive Bond Strength | 29.0 MPa | 4200 psi | Steel lap shear |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 93.3 °C | 200 °F | |
| Minimum Service Temperature, Air | -53.9 °C | -65.0 °F |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | >= 0.133 min | >= 0.00222 hour | Fixture |
| 480 min | 8.00 hour | Full cure |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Base | Ethyl | |
| Color | Clear | |
| Gap Fill (mil) | 8 |
