BP Amoco Acctuf® 3950 Impact Copolymer Polypropylene (discontinued **)
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
Description
Material Notes:
Suggested fabrication methods: Injection moldingFeatures: Low gloss, High melt flow, Low temp impact, NucleatedComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injection molded samples.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.886 – 0.926 g/cc | 0.0320 – 0.0335 lb/in³ | ASTM D1505 |
| Water Absorption | <= 0.010 % | <= 0.010 % | 24 hours; ASTM D570 |
| Linear Mold Shrinkage | 0.010 – 0.025 cm/cm | 0.010 – 0.025 in/in | ASTM D955 |
| Melt Flow | 35 g/10 min
@Load 2.16 kg,
Temperature 230 °C |
35 g/10 min
@Load 4.76 lb,
Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 79 | 79 | ASTM D785 |
| Tensile Strength, Yield | 24.0 MPa | 3480 psi | ASTM D638 |
| Elongation at Break | >= 50 % | >= 50 % | ASTM D638 |
| Flexural Modulus | 1.31 GPa | 190 ksi | ASTM D790A |
| Izod Impact, Notched | 1.35 J/cm
@Diameter 3.17 mm
|
2.53 ft-lb/in
@Diameter 0.125 in
|
bar; ASTM D256 |
| 0.500 J/cm
@Diameter 3.17 mm,
Temperature -20.0 °C |
0.937 ft-lb/in
@Diameter 0.125 in,
Temperature -4.00 °F |
bar; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 104 °C | 219 °F | ASTM D648 |
